PS Audio DirectStream Power Plant 20 Power Regenerator
$21,995.00 inc. GST
- Built-in Boulder, Colorado, USA
- 2000 VA output
- 40% more power
- 13 x AU/NZ outlets
- 13 amp AC input
- 230 volt Regulated
- Range 200 –285VAC
- Passively cooled
- Pure Sine Wave
- MultiWave
- Integrated oscilloscope
- THD meter
- Improvement meter
- Power meter
- Control over the LAN
- Adjustable output voltage
- Colour touchscreen
- Field upgradable
- 100% regenerated AC
Description
PowerPlant 20
Design
Application
Overview
When it comes to regenerated AC power we wrote the book. With two decades of engineering and a patented architecture in hand we built the biggest and best Power Plant ever. The P20 converts your home’s variable, compromised AC power into pure DC, then back again into safe, protected, regulated, perfect AC. The P20 will improve system performance like nothing else. DirectStream Power ushers in a new world of purity with a clean, analog-like DSD generator. With twice the number of output devices and double the power supply storage of any previous Power Plant, DirectStream P20 is the new benchmark for power products. Regardless of the quality of AC coming into P20, your equipment is guaranteed clean, safe power, with significantly lower distortion than ever before. Safe, regulated to within 1/10th of a volt, P20 provides unquestionable purity for systems of all sizes. The 7-inch, full color display on the front panel of the P20 allows you to measure distortion, both incoming and outgoing, improvement levels, and power consumption. You can also adjust your settings, such as the turn on/off sequence and the output voltage, as well as turn individual zones on or off, and measure the power quality with either the built-in oscilloscope or the THD analyzer.
Output
The P20 takes in your home’s noisy, distorted, and unregulated AC and outputs pure and perfect power that dramatically enhances sound quality. It does this by rebuilding the AC, lowering output impedance, and regulating the voltage. Low output impedance is critical to maintaining a dynamic presentation. Powering equipment through a passive power conditioner only worsens the problem and should be avoided. The Power Plant, on the other hand, has such low output impedance (0.008Ω vs. typical 0.4Ω) that even the hungriest of amplifiers won’t be starved for clean AC power. When your amp is asked to produce loud orchestral levels, you want to make sure it has all the power it needs and only a Power Plant provides a constant output regardless of the dynamic demands of equipment or your neighbors. Power Plants also generate new waveforms that enhance the capabilities of your equipment. MultiWave extends the peak charging time of the sine wave so connected equipment has more energy storage and less power supply ripple. The results are dramatic: a bigger more musically accurate soundstage than with a simple sine wave.
Protection
An electrical surge, or spiked transient, is an intense, short-duration voltage increase that travels through electrical wiring in our homes. It can severely damage connected equipment. Shielding devices from these potential electrical problems is mandatory if we’re to protect our investment and ensure the safety of our homes. These electrical transients are not the only potentially damaging problems faced by our sensitive audio systems. There are also sustained over-voltage conditions that many surge suppression devices will not be able to protect equipment from. Owners who have invested in a Power Plant can rest assured their connected equipment will be safe from any power line event such as over voltage, under voltage, surges, spikes and potentially threatening problems. The input voltage to the Power Plant is fully protected by state-of-the-art clamping devices and the output of the Power Plant is fully regulated so even large voltage swings that would normally damage connected equipment are made safe by either clamping or regulating. In most cases, connected equipment enjoys the protection and performance benefits of fully regulated power, even under extreme circumstances.
Specifications
Location: Indoor use only
Duty Cycle: Suitable for continuous operation
Moisture Sensitivity: Not sealed against moisture
Operating Humidity: <80%rh
Storage Temperature: -40C to +40C
Operating Temperature: 0C to 40C
Max Operating Altitude: 3,500m
Electrical Supply Nominal Rating: 230V 10A 50/60Hz
Unit Dimensions (W x D x H cm): 43 x 36 x 27.9 cm
Unit Weight: 43.5 kg
Shipping Dimensions: 58cm x 55.8cm x 43cm
Shipping Weight: 47 kg
Nominal Input Voltage: 200 –285VAC
Maximum Continuous Load: 2000VA
Maximum Peak Load: 3600VA
Voltage Regulation: 1V
Output Distortion (Resistive Load): <0.5%
Output Distortion (Reactive Load): <0.5%, 0.1% typical
Output Impedance: 80dB
Efficiency at 1200 VA: >85%
Input Frequency: 45 – 65 Hz
Under Voltage Limit: Continuous -10% of setting 15 sec duration -15% of setting
Over Voltage Limit: Continuous 5% of setting 15 sec duration 10% of setting
Energy Dissipation: 5040J
Peak Current Surge: 180,000A
Max Surge Voltage: 775V
Clamp Level: 800V
DC Trigger Configuration: Tip Positive
DC Trigger Voltage: 5 – 15Vdc
Warranty: 3 Years