Marantz PM-12SE Integrated Stereo Amplifier
$4,999.00 inc. GST
- Engineered and extensively tuned by a team, drawing on more than 65 years of Marantz amplifier design knowledge
- Marantz high-resolution preamplifier stage with proprietary HDAM technology
- Switching power amplifier design derived from flagship PM-10 amplifier
- Generous output: 100W + 100W (into 8ohm), 200W + 200W (4ohm)
- Fully-discrete, two-stage design for signal purity, with separate power supplies for preamp and power amplifier sections to reduce interference
- Toroidal transformer dedicated to preamp for clarity and powerful sound
- Current feedback design with newly-developed wide-range circuitry
- HDAM® SA3 circuitry for clean signal and optimal dynamics
- MM/MC Phono input with new discrete Marantz Musical Premium Phono EQ circuit
- Thick nickel-plated copper independent input terminals for CD and Phono, plus Marantz-original high-quality/high-purity copper-plated speaker terminals
- Linear volume control with new electric volume system
- High-quality construction with double-layer chassis and solid aluminum front
- Purest Mode deactivates unused circuits for best audio performance
- High-grade, carefully selected audio parts: ultra-low leak current Schottky diodes, low noise complementary transistors, high-grade resistors, newly developed custom electrolytic capacitors, audio grade film capacitors and mica capacitors.
Description
PM-12SE
SPECIAL EDITION INTEGRATED AMPLIFIER.
Special Edition Integrated Amplifier
Balanced Power Amplification
Drawing on design elements of the PM-10, the PM-12SE is built to leverage enhancements, maintain the purest possible sound and supply the power needed to drive the most demanding speakers.
Current Feedback Amplifier
Current Feedback amplification is a well-known, Marantz-original circuit technology, thoughtfully designed to match the expectations of your Hi-Res music for wide-bandwidth and ensured high-speed reproduction.
Marantz HDAM Technology
The result is a much more dynamic, accurate and detailed sound. Over the years, Marantz has developed different HDAM technology to fit the particular requirements of players and amplifiers. The PM-12SE uses the latest high-grade HDAM-SA3 technology, combined with optimized circuit design layout and carefully selected components, the PM-12SE ensures exceptional sound quality and performance.
Marantz Musical Premium Phono EQ
Designed to deliver optimal sound quality by simplifying the signal path, the Marantz Musical Premium Phono EQ stage in the PM-12SE amplifier can be used with both moving magnet and low-output moving coil cartridges.
High Quality Volume Control
Newly developed electric volume control uses the latest volume control IC to realize better channel separation, dynamic range and distortion-reduction, while retaining the operational feel of an analog volume control device. The amplifier employs new Marantz-designed electric volume control for high linearity and best-in-class channel separation.
Additional information
| Colour |
|---|
Specifications
Power Output (8 / 4 Ohm RMS): 100 W / 200 W
Frequency response: 5 Hz-50kHz
Total Harmonic Distortion: 0.005%
Damping Factor: 500
Input Sensitivity: MM 2.3 mV / 39 kohm
Input Sensitivity: MC 250 mV / 100 ohm
Signal to Noise Ratio: MM/MC 88 / 75 dB
Input Sensitivity: High level 220 mV / 13 kohm
Input Sensitivity: Balanced High level No
Signal to Noise Ratio: High level 107 dB(2V input/Rated output)
Input Sensitivity: Power Amp Direct IN: No
Signal to Noise Ratio: Power Amp Direct IN: No
Channels: 2
Current Feedback Topology: Yes
Full balanced circuitry architecture: No
Double Mono Power Amp construction: No
Phono EQ: Standard / Marantz Musical / Marantz Musical Premium: No / No / Yes
HDAM version: SA3, SA2
Power Transformer: Toroidal / El: SMPS
High Grade Audio Components: No
Customised Components: No
Symmetric PCB Layout: No
Aluminium extrusion heat sink: Yes (Separate)
Copper Plated Chassis: No
Tri Tone Control (Bass / Mid / Treble): No
Balance / Bass / Treble / Loudness: Yes / Yes / Yes / No
Linear Drive Power Supply: Yes (pre-amplifier stage)
Linear volume control: Yes
BI-AMP and Multichannel option: Yes
Schottky diodes: Yes
Input buffer amp (all inputs / CD only): No / No
System block shielding: Copper / metal / none: Yes / No / No
Double Layer Bottom Plate: Yes
Low Noise OELD display: Yes
Audio Inputs: 6
Phono Input: MM / MC: Yes / Yes
Audio Outputs: 2
Balanced In / Out No / No
Pre-out / Main-in: No / No
Power Amp Direct IN: Yes
Gold Plated Cinch: Yes
Speaker A / B: No
Speaker Terminals: Marantz SPKT-100+
Number of terminals: 2
D-Bus: Yes
Floating Control Bus (3.5 mm mono jack x 2): Yes
Headphone Out: Yes
Headphone Gain Control (low / mid / high): No
Metal Front Panel: Yes
Power Consumption: 130w
Standby Consumption: 0.2w
Auto Power off: Yes
Detachable Power Cable: Yes
Remote Control: RC005PMSA
System Remote Function: Yes
Maximum Dimensions (W x D x H): 440 x 453 x 123mm
Weight: 15.3Kg
Carton Maximum Dimensions (W x D x H): 557 x 536 x 243mm
Carton Weight (incl. product): 18.4Kg
Related products
-
Rotel A10 Integrated Amplifier
$1,099.00 inc. GST
